RUTLAND Grapho-Glas® Stove Gasket Kits include both high-quality gasketing in convenient rope or tape, plus cement to allow the DIY homeowner to confidently replace worn-out gaskets in wood stoves, coal stoves, outdoor wood boilers, and fireplace inserts.
This graphite-impregnated gasketing resists abrasion, creosote adhesion, and temperatures up to 1000ºF, and is braided to resist fraying.
Kit also contains 1.35 oz tube of RUTLAND E-Z Spread Fiberglass Stove Gasket Cement to securely attach the provided gasketing.
- 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" Rope in 7' lengths or 5/8" x 3/16", 3/4" x 1/4" Tape in 7' lengths
- Made in the USA
WARNING: These products can expose you to chemicals including Soot, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
We recommend wearing protective gloves and eyewear. Working with a cold stove, remove all old gasketing and adhesive from the channel of your stove door or window. For the adhesive to adhere properly, you must clean to bare metal in the gasket channel. Lightly dampen the gasket and the gasket channel in the stove door.
Knead Tube Before Use. Cut tip on angle. Apply a 1/8″ bead of cement into gasket channel, then press the gasket firmly into the channel adhering to cement. Close the door to create a crease in excess gasket. Open door and trim excess gasket at crease. Leave the door open and allow to air dry for one hour. Be sure to heat cure within 30 days.